telling_lime_logo

Telling Lime Limited
Booths Hall
Booths Park
Chelford Road
Knutsford
Cheshire
WA16 8GS.
Tel: 01565 756110
Email: info@tellinglime.co.uk
Web: www.tellinglime.com

TELLING LIME
UNILIT NATURAL HYDRAULIC LIME PLASTERS AND RENDERS
CORIDECOR LIME PUTTY PLASTER AND RENDER POLISHED FINISHES

PLASTERED/ RENDERED/ ROUGHCAST COATINGS

Telling Lime - Natural Hydraulic Lime
Telling Lime manufacture and are distributors for a range of natural lime mortar products for various applications, together with stabilisation and consolidation grouts, mesh reinforcement and lime paints and finishes. The natural hydraulic lime products replicate the strength, porosity, adhesion, vapour permeability and flexibility of historic mortars.

Unilit mortars conform to European Standard ENV 459-1 for natural hydraulic lime mortars. The products are manufactured using a modern day manufacturing process, are guaranteed against failure for 10 years and are warranted against defect under a professional indemnity insurance. Telling also manufacture a range of bonding agents for use with Unilit mortars. 

Unilit 15 P2 Bonding Layer. - Multi-purpose bonding layer.

Unilit 15 P2 Bonding Layer.
Unilit 15/P2 is designed as a keying or priming coat in a maximum layer of 10 mm, for the application of Unilit render undercoat layers (Unilit 20, 25, 30, 35N, 35M or Unilit Fen-XA) where required as above. Unilit 15P2 can also be applied as a  levelling layer to existing render surfaces prior to application of Unilit 15P1 and Unilit finishes.
Colour:                                                                                  Beige.
Packaging:                                                                             30 kg bags, in powder form.
Density:                                                                                 1600 kg/m3.
Bending - tensile strength:                                                       4 N/mm2 after 60 days; 6 N/mm2 after 90 days.
Bonding strength (DIN 18.555):                                             2 N/mm2.
pH:                                                                                        > 10.5.
Maximum granular size:                                                        2 mm.
Consult Telling technical service department for advice on the suitability of the substrate.
Consult with Unilit technical literature for details. Natural hydraulic lime mortars are specialist products and it is recommended that Telling Lime are consulted early in the design process.

Manufacturer: Telling Lime Limited, Booths Hall, Booths Park, Chelford Road, Knutsford, Cheshire, WA16 8GS. Tel: 01565 756110 Email: info@tellinglime.co.uk  Web: www.tellinglime.com
Product reference: Unilit 15/P2.
Application: Evenly across background to achieve effective bond or plaster/ render coat to background. Protect adjacent joinery and other surfaces.
Mix Unilit 15 with clean water - 4.5 to 5.25 litres of water to 30 kg of powder depending on the temperature and substrate. Mix manually or mechanically for 2 to 3 minutes.
Apply manually or mechanically to a dry or wet substrate, the . If the substrate is too dry, dampen down the surface prior to application. Do not apply in temperatures below 5°C or above 40°C. The mortar remains workable for 2 hours and dries in 4 hours. Protection must be provided in conditions of excess heat or drying winds as well as from frost for 48 to 72 hours.
Apply keying, priming or levelling coat of Unilit 15/P2 in a maximum layer of 10 mm by steel trowel and finish with open texture for the application of following layers.